9.0 REAL TIME CLOCK SETUP
The Real Time Clock (RTC) is used only for the RS-232 output. The Date and Time can be
set as required. The scale will keep the clock running even when the power is off.
Setting up the clock:
•
Press the [SETUP] key to bring up the settings menu. From here you can
use digits [1] and [6] to scroll through the menu. Date and time are set
separately.
•
Once you have selected either 'date' or 'time', press the [tare] button to
accept.
Setting the time:
Press the [Tare] ↵ key when in the time menu to show the current time
•
counting down after power is turned on.
"11,14,06" "16,41,35"
Press the [0] or [Tare] ↵ key to accept the values shown without
•
change or press the [CE] key to change the time.
•
Enter the time using the numeric keys using a 24 hour clock format, 3:41PM
is "154100".
•
Press the [Tare] key to accept the time.
Setting the date:
Press the [Tare] ↵ key to show the current date format in the display.
•
Press the digits [1] or [6] to scroll through the date formats and the [Tare] ↵
•
button to accept. Available formats are:
"Y-m-d" year, month, day
"m-d-Y" month, day, year
"d-m-Y" day, month, year
Press the [Tare] ↵ key to bring up the current date and the [CE] key to clear
•
the current setting then enter the new values.
Press the [Tare] ↵ key to accept the date.
•
An error code will be shown if the time (Err 1) or the date (Err 2) is not the permissible values.
th
For example, 34
day of a month is an invalid entry.
© Adam Equipment Company 2019
18