Percent Weighing - Adam Cruiser CKT Serie Manual Del Usuario

Limits storing and recalling
The indicator can store up to 10 sets of high and low limits in memory along with the weighing
units in use (including pcs and %) as well as settings for the beeper. Limits can be stored
previously stored units can be recalled.
If you are already in the check weighing mode the display will ask
if you wish to store the current limits by showing "StorE" or recall
another set of limits by showing "Recall".
The [Lim] key can be used to toggle "StorE" and "rECALL" view
using digits 1 or 6.
Store
If you want to store the limits, when "StOrE" is displayed press the [Tare] ↵ key. The display
shows the current function "Pos". Enter a number corresponding to the desired memory
location (0 to 9) and press [Tare] ↵ to accept. Once you have entered the desired "PoS"
number, you can then store new Low and high limits manually using the numeric keypad and
pressing [Tare] ↵ to enter.
Recall
If you wish to recall any of the pre-stored limits, press [Tare] ↵ when "rECALL" is
The display shows "Pos". Enter the number corresponding to the desired memory location (0
to 9) to be recalled then press [Tare] ↵ to accept.
NOTE: If the recalled limit is for parts counting or percent weighing, the display will show the
last sample value used, ready for a new sample to be counted. If the memory location was
empty the scale will return to weighing.
3.7

PERCENT WEIGHING

The scale will use a mass on the platform as the 100% reference weight or input a reference
weight using the keypad:
© Adam Equipment Company 2019 11
displayed.