Remote Controller - EAS ELECTRIC EMCH Serie Manual De Instalación Y Manual De Usuario

 Remote controller
● The wired controller is optional.
● Please use 3-core shielded wire to connect the wired controller and the shielding layer must be
grounded.
● When connecting wired controller, outdoor unit control panel is mainly used for display which can check
parameters and inquiry, can't be used to set mode and temperature.
The Specification of Power:
Type EMCH-07W/1
Power(V/Ph/Hz)) 220~240/1/50
Circuit breaker/fuse
30/25
(A)
2
Power wire (mm ) 3×2.5
2
Ground wire (mm ) 2.5
Important
The power cord type designation is H07RN-F.
Connecting cable between indoor unit and outdoor unit shall be approved poly-chloroprene sheathed flexible
cord, type designation H07RN-F or heavier cord.
The means for disconnection from a power supply shall be incorporated in the fixed wiring and have an air
gap.
9
10 11
P P Q E
EMCH-10W/1
EMCH-14W/3
EMCH-12W/1
EMCH-16W/3
220~240/1/50 380~415/3/50
40/35 30/25
3×6.0 5×4.0
4.0 2.5
V.2
49