EAS ELECTRIC EMCH Serie Manual De Instalación Y Manual De Usuario página 139

Size and position of connections
For EMCH-07W/1
auto-water
replenishing orifice
security discharge
A
Model
(mm)
95
EMCH-07W/1
For EMCH-10W/1 - EMCH-12W/1 - EMCH-14W/1 - EMCH-16W/1
A
Model
(mm)
EMCH-10W/1
EMCH-12W/1 300
EMCH-14W/3
EMCH-16W/3
Important
a) The installation must be filled to a pressure of between 1 and 2 bars.
b) It is recommended that this operation be repeated after the unit has been operating for a number of
hours. The pressure of the installation should be checked regularly and if it drops below 1 bar, the water
content should be topped-up.
c) Check the hydraulic tightness of joints.
d) An all-pole disconnection device which has at least 3mm separation distance in all pole and a residual
current device (RCD) with the rating of above 10mA shall be incorporated in the fixed wiring according to the
44
water inlet
water outlet
B C D
(mm) (mm) (mm)
126 250 360
auto-water
replenishing orifice
water outlet
water inlet
B C D
(mm) (mm) (mm) (mm)
195 155 105 68
E
F
Water
E F
inlet/outlet
(mm) (mm)
(Ø)
68 114 R1
security discharge
E
F
E F Water
(mm) inlet/outlet (Ø)
105 R5/4
V.2
Auto-water
Security
replenishing
discharge (Ø)
(Ø)
G1/2 G1/2
Auto-water Security
replenishing (Ø) discharge (Ø)
G1/2 G1/2