Kohler K-9530 Guia De Instalacion página 9

Deck/Rim
Brass
Mounting
Nut
4. Install the Diverter
If installing to a finished deck: At the diverter install location,
drill a 1-1/2" (3.8 cm) hole.
NOTE: You may need assistance to align and secure the diverter.
Thread the mounting nut all the way down onto the diverter
body.
Slide the friction washer followed by the rubber washer over the
diverter body and down to the mounting nut.
Insert the diverter body through the deck/rim/wall.
Slide the washer onto the diverter body.
Thread the escutcheon onto the diverter body until the top of the
escutcheon is flush with the top of the diverter body. This will
allow ample clearance for proper handle function.
Align the inlets and outlets.
Hand tighten the mounting nut.
Kohler Co.
Escutcheon
Washer
Rubber
Washer
Friction
Washer
9 113228-2-CC