Tools And Materials; Before You Begin - Kohler K-9530 Guia De Instalacion

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Adjustable
Drill and
Wrench
Hole Bit
Tape
Propane
Measure
Torch

Before You Begin

WARNING: Risk of personal injury. This product is a diverter
valve only and should never be used as a shut-off valve. Use as
a shut-off valve will allow cross flow between the hot and cold
water supplies and will create a serious scalding hazard.
Please read all instructions before you begin.
Observe all local plumbing and building codes.
Shut off the main water supply.
Provide an access panel for all installations.
Carefully read this entire instruction manual before beginning the
installation; the illustrations do not show all possible
configurations.
This diverter can be installed to decks with a maximum thickness
of no more than 1-1/4" (3.2 cm).
Carefully inspect waste and supply tubing for any sign of
damage. Replace if needed.
113228-2-CC
Plus:
• Supply piping,
connectors, and caps
3/32" Hex
Wrench
Solder
2 Kohler Co.