Incompatible Vehicle Seat Belts - Britax DUALFIT Guia Del Usuario

BRITAX Child Safety, Inc.
6� Insert the harness straps
through the slots in the
cover and shell, and over
the harness adjuster plate
to the back of the child
seat�
7� Nest the harness straps
by inserting the right strap
loop into the left strap
loop�
8� Remove the harness yoke
from storage underneath
the seat shell and slide
the nested harness straps
completely onto the
harness yoke�
9� Buckle the harness and
pull the adjuster strap to
tighten the harness�
NOTE: Pull the harness
adjuster away from the
child seat (parallel to the
ground) to tighten.
IMPORTANT: Check all attachments before using the
child seat�
34

Incompatible Vehicle Seat Belts

WARNING!
The following types of vehicle seat belts are NOT
compatible with this child seat� If any of the belt types
listed below are in the chosen seating position, choose
another vehicle seating position or check your vehicle
owner's manual for information on installing a car seat in
your vehicle�
Lap belts with a sewn-
in latch plate that
have a retractor that
locks only in case of a
sudden stop�
Lap-shoulder belts with
top or bottom anchor
points on the vehicle
door�
NOTE: This Britax car seat may not be compatible with
every inflatable lap-shoulder belt. See FAQS in the support
section of the Britax website (us.britax.com/faqs) for
additional instructions.
DUALFIT User Guide
Lap belts forward of the
vehicle seat bight�
Motorized, automatic
vehicle seat belts�
35