Britax DUALFIT Guia Del Usuario página 10

BRITAX Child Safety, Inc.
Lap Belt
Before you begin:
• Check that your vehicle has a seat belt that can be
locked�
Check your vehicle owner's manual to determine
what type of vehicle belt you have and how it can be
locked for use with child seats�
• Check that your vehicle has a top tether anchor�
Britax recommends that the top tether be used at all
times when installing the child seat� Using the top
tether will improve the stability of your child seat and
reduce the risk of injury� Check your vehicle owner's
manual for tether anchor locations�
• Loosen the tether and place it over the child seat
back to keep it from becoming pinned between the
child seat and vehicle seat during installation�
• Adjust the child seat to desired position and place
forward facing on the vehicle seat�
1� Pull seat cover forward�
2� Pull the vehicle belt out
and route along the green
belt path� Verify that the
belt is not twisted and then
buckle�
3� Push the child seat firmly
into the vehicle seat while
removing all slack from
the lap part (a) and the
shoulder part (b) of the
vehicle belt� Ensure that
the vehicle belt is locked
as directed by your vehicle
owner's manual�
NOTE: The child seat is secure when it cannot be
moved front-to-back or side-to-side more than 1 in.
(2.5 cm) at the belt path. If the child seat is not secure,
repeat the installation procedure or use a different
seating location.
14
4� Firmly press the tether
hook over a designated
vehicle tether anchor�
Remove slack�
5� Secure excess webbing
with the elastic strap�
Harness Mode: Lap Belt
9 Check all connections and verify that child seat is
secure�
The child seat is secure when it cannot be moved
front-to-back or side-to-side more than 1 in� (2�5 cm)
at the belt path� If the child seat is not secure, repeat
the installation procedure or use a different seating
location�
9 Check that any excess tether webbing is contained
within your vehicle and secured in the elastic strap�
DUALFIT User Guide
Or
Or
15