Britax DUALFIT Guia Del Usuario página 9

BRITAX Child Safety, Inc.
Lower Anchors
Before you begin:
• Check that your vehicle has lower anchors�
Use the vehicle belt (not lower connectors) for
harness mode installations with children who weigh
more than 45 lbs (20�4 kg)�
• Check that your vehicle has a top tether anchor�
Britax recommends that the top tether be used at all
times when installing the child seat� Using the top
tether will improve the stability of your child seat and
reduce the risk of injury� Check your vehicle owner's
manual for tether anchor locations�
• Loosen the tether and place it over the child seat
back to keep it from becoming pinned between the
child seat and vehicle seat during installation�
• Adjust the child seat to desired position and place
forward facing on the vehicle seat�
1� Pull seat cover and seat
pan forward to access the
lower connectors�
2� Route the lower connector
strap along the green belt
path behind the seat pan
and firmly press the lower
connectors onto their
adjacent lower anchors�
NOTE: Verify that the strap
is not twisted.
3� Push the child seat firmly
into the vehicle seat while
removing any slack from
the lower connector strap
to remove slack�
NOTE: The child seat is
secure when it cannot be
moved front-to-back or
side-to-side more than 1 in. (2.5 cm) at the belt path.
If the child seat is not secure, repeat the installation
procedure or use a different seating location.
12
4� Firmly press the tether
hook over a designated
vehicle tether anchor�
Remove slack�
5� Secure excess webbing
with the elastic strap�
Harness Mode: Lower Anchors
9 Check all connections and verify that child seat is
secure�
The child seat is secure when it cannot be moved
front-to-back or side-to-side more than 1 in� (2�5 cm)
at the belt path� If the child seat is not secure, repeat
the installation procedure or use a different seating
location�
9 Check that any excess tether webbing is contained
within your vehicle and secured in the elastic strap�
DUALFIT User Guide
Or
Or
13