Angelcare AC115 El Manual Del Proprietario página 13

TURN ON YOUR MONITOR
Press ON/OFF
on the Parent
Unit
When Parent Unit is turned ON and Nursery Unit is OFF or if there
is a lost connection between the 2 units (refer to troubleshooting).
The Out-of-range icon will blink on the screen and the Parent Unit
will beep.
IMPORTANT ICONS
Detection mode icons: Indicates monitor detection mode
Movement only
Movement & Sound
VOX icon: Indicates when the Nursery Unit is in VOX mode
Sound activated transmission (VOX ON)
Continuous sound transmission (VOX OFF)
Sensitivity
Connection icon: Indicates the connection quality between the
Parent Unit and the Nursery Unit
Out-of-range
Medium connection
Temperature display: Indicates room temperature
Temperature alerts icons: Indicates Temperature
Alarm is active
Too Warm Too Cold
Battery level icon: Indicates Parent Unit battery life
Full 1/2
Press ON/OFF
on the Nursery
Unit
Sound only
Movement & "TIC"
Poor connection
Good connection
Empty
1) Press the Parent Unit ON/OFF
button for 2 seconds.
2) Press the Nursery Unit Power
ON/OFF button for 2 seconds.
NOTE:
The screen of the Parent Unit will
flashes the out-of-range icon till it
displays the room temperature and
function icons. The connecting process
should be done within 30 seconds. If
this sequence is not completed within
30 seconds you will need to switch the
units off and start again.
Movement, Sound & "TIC"
Charging
13