USING YOUR DEVICE
MEASUREMENT
3. Press the power button to turn the unit on. The screen will
briefly flash a test display, and then begin the measurement.
4. Solid dashes (– – –) will appear on the display for a few
seconds, then the display will begin to show the oxygen
saturation (SpO
Take care to not move excessively during monitoring. These
are active readings and may fluctuate slightly as you observe
the display, responding to your heart rate (bpm) and other
factors.
5. The Pulse Ox Fit should only be used for spot-checking blood
oxygen saturation and pulse rate and should not remain on
the finger for more than a few minutes at a time.
6. Remove the unit from the finger. The unit will automatically
turn off after 5 seconds.
7. Clean the unit as directed before storage.
14 • ENGLISH
) and pulse rate (PR bpm) measurements.
2