Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FIXING THE OVEN IN ITS COMPARTMENT
1. Place the oven in its compartment.
2. Open the oven door.
3. Secure the oven in your kitchen compartment with the two "A" fasteners,
which fit into the holes in the oven frame, and with the two "B" wood screws.
ELECTRIC CONNECTION
* The device must be connected to the main electrical network only by authorized
technicians in accordance with the laws and regulations in force.
* Ensure that the power of the main network is sufficient to supply the power indicated
on the information label placed on the lower front part of the device.
* If the fuse current in your home is less than 16 Amps, have a 16 Amp fuse connected
by a qualified electrician.
WARNING: The device must be absolutely grounded.
* Your oven includes a grounded plug mounted on the network cable. This plug must be
used with a grounded line. Have an authorized electrician perform the grounding
installation.
Before supplying electricity to the device:
1)
Position the oven so that it is easier to reach the socket used for the electrical connection or the
bipolar switch.
2)
Do not let the power cord touch the hot surfaces when it is placed and do not attach it to the
oven lid.
3)
Contact the nearest authorized service center if the power cord is damaged. Make sure that the
authorized service has the opportunity with a new cable with plastic insulation of the same size
and that can withstand the electric current needed by the oven.
* A bipolar switch with at least 3 mm must be installed between the points of contact between
the device and the electric cable and suitable for transporting the desired load in accordance
with the laws in force.
N
L
6
Tabla de contenido
