Front Operating Elements - Medion AKOYA P55005 Manual De Instrucciones

Front Operating elements

Ref. Button
8
1

9

10
11
2
12 Operational display
13
10
(Ill.: Front operating elements)
Description
You will start the OSD (On Screen Display) with this button. Press this button
again if you wish to leave the OSD.

1
+ Power block, when the OSD is not activated

1
+ OSD block, when the OSD is not activated
Hold the key combination until the bar siplayed has moved from left to right
completely, to activate/de-activate the block. A corresponding message will
appear on the screen.
Select a parameter and reduce its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the Contrast/Brightness menu.
Select a parameter and increase its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the Opti Color menu.
Confirm the selection of the parameter to be changed with this button.
If you are not in the OSD: Call the Input Source menu.
Shows the operational state. Please also refer to page 13.
You can switch the TFT monitor on or to the Standby mode with this button.
English