Norms / Electromagnetic Compatibility; Bringing The Device Into Operation; Setup - Medion AKOYA P55005 Manual De Instrucciones

Norms / Electromagnetic compatibility

The TFT monitor fulfils the requirements for electromagnetic compatibility and electrical safety of the following
regulations:
EN 55022:2006
EN 55024:1998 +
A1:2001 +
A2:2003
EN 61000-3-2:2006
EN 61000-3-3:1995 +
A1:2001 +
A2:2005
EN 60950-1:2001 +
A11:2004
 The Guidelines for electromagnetic compatibility (EMV) must be observed at the connection.
 Maintain at least one metre clearance from high frequency and magnetic sources of interference
(television device, loudspeakers, mobile phone, cell phone, etc.), in order to avoid disruptions to function
and data loss.
 The failure of individual or several scanning spots can arise in rare cases, in spite of the most modern
manufacture, because of the highly complex technology.
Your device complies with the European Norm ISO 13406-2 Class II (Pixel error class) (see P. 16).
Your device complies with the basic requirements and the relevant guidelies of the 2004/108/EU EMV Guidelines
[electromagnetic compatibility] and the 2006/95/EU Guideline for low voltage devices.
This device fulfils the basic requirements and the relevant regulation of the Ecodesign Guideline 2009/125/EG
(Commission Regulation 1275/2008).

Bringing the device into operation

Information
Please read the "Safety information" chapter on page 3 under all circumstances before
bringing the device into operation.

Setup

Attach the stand of the TFT monitor as illustrated. Carry out this step before connecting the monitor.
Information technology equipment, interference – Limiting values and measuring
procedure
Information technology equipment – Characteristics resisting interference - Limiting
values and test procedure
Electromagnetic compatability (EMV); Part 3: Limiting values; Section 2: Limiting
values for harmonic currents (device input current < 16A per conductor)
Electromagnetic compatibility (EMV); Part 3: Limiting values; Section 3: Limiting values
for variations in voltage and flickerin in low voltage networks for devices with and
input current < 16A per conductor
Safety of information technology equipment
(Ill.: Installation of the monitor stand)
Bringing the device into operation
DE
EN
FR
ES
IT
NL
5