Steren MIX-160 Manual De Instrucciones página 19

3. TRIM: Adjusts the input sensitivity of the mic and line inputs. The internal
scale (+10 ~30 dB) corresponds to the musical instruments or other devices, the
external (0-40 dB) corresponds to the microphones.
4. LINE IN 3/4/LINE IN 5/6:
instruments or other devices.
If only the left input is connected, the channel operates in mono.
5. EQ:
3 band EQ. Set the frequency range on each input channels in 3 levels:
- Treble:
with a central frequency of 12 kHz.
- Mid: Set the frequencies from the all musical instruments and human voice.
The gain range goes between -12 dB to +12 dB with a central frequency of
2,5 kHz
- Bass: The bass control set the male voice and the guitars or drums. The gain
range goes between -15 dB to +15 dB with a central frequency of 80 Hz.
6. AUX:
Send the audio signal to Auxiliary Bus. The signal sent to Aux Bus is
affected by the Main Level Control.
7. PAN/BAL:
(left and right), put the knob on the middle of stage. If you want to hear only one
channel move the knob to the corresponding side.
8. PEAK LED:
6 6
Stereo inputs to connect audio players, musical
Set the treble sounds, the range goes between -15 dB to +15 dB
Set the audio signal balance. If you want to hear both channels
The Peak LED illuminates when a channel is going into overload.