Features; Assembly - RIDGID R7001 Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
 Chuck Capacity ...................................1/16 in. to 3/8 in.
 Input ............................... 120 V, AC only, 60 Hz, 8 Amps
 No Load Speed ............................. 0-2,700 r/min. (RPM)
KNOW YOUR DRILL
See Figure 1, page 12.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BELT CLIP
A belt clip is molded into the top of the motor housing on
your drill.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE)
Your drill has a direction of rotation (forward/reverse) selector
located above the switch trigger for changing the direction
of bit rotation.

ASSEMBLY

UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from

the box. Make sure that all items listed in the packing
list are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
Inspect the product carefully to make sure no breakage

or damage occurred during shipping.
Do not discard the packing material until you have

carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call

1-866-539-1710 for assistance.
PACKING LIST
Drill
Tool Bag
Operator's Manual
 Switch .........................VSR (Variable Speed Reversible)
 Net Weight .......................................................... 3.6 lbs.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.
LOCK-ON BUTTON
The lock-on button is convenient for continuous drilling for
extended periods of time.
VARIABLE SPEED
The switch trigger delivers higher speed with increased
trigger pressure and lower speed with decreased trigger
pressure.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result
in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
7 - English