Carlson Pet Products 0938 PW Manual De Instrucciones página 4

Positioning and Attaching the Wall Cups
STEP 1
After you have mounted your gate, and you are satisfied
with its positioning, draw a circle on the surface of your
doorway or opening around the perimeter of the (4)
rubber feet. Next, completely remove the gate from the
opening by loosening each of the (4) threaded spindle
rods to depressurize the gate.
Adding a Gate Extension
STEP 1
STEP 2
With the gate fully removed, you can now use the
circles you marked during Step 1 as guides for screwing
in your (4) wall cups (D). Center each of the wall cups
within the guide circles and use the provided
self-tapping screws (E) to fasten them in place via the
hole through the center of each wall cup.
Remove the top and bottom threaded spindle rods.
Assemble the gate and extension as illustrated. Reposition the gate and fit in
accordance with the gate fitting instructions.
It is preferable to install any extensions on the hinge side of the gate. NOTE:
STEP 3
Reinstall your gate in the doorway or opening
according to the instructions, using the newly
installed wall cups as anchoring points for the (4)
threaded spindle rods.