Tabla de contenido
Idiomas disponibles
Idiomas disponibles
e. Route the Purple/White wire from the
hood switch harness through the secondary
lock, through the weather seal and into the
terminal 3 (G70 circuit) slot of the connector
housing.
Pin 3 (G70 circuit)
f. Reinstall the front portion of the connector,
observing that all terminals are seated
correctly and are in the right direction.
Reinstall the weather seal and the secondary
lock.
g. Reinstall the connector into the TIPM.
4. Reinstall the TIPM
a. Reinstall TIPM onto the mounting location
Wire End View
Locking Tabs
6 of 10
Locking Tabs
Tabla de contenido
