Tabla de contenido
Idiomas disponibles
Idiomas disponibles
This vehicle may be equipped with a "Factory Installed" hood switch harness. This har-
ness will not be visible but will be secured to the factory harness located just in front of
the windshield washer reservoir. If this harness is present, Refer to step "a" in the
"Hood Switch Harness Installation" section below and connect the hood pin switch as
described, then proceed to "Remote Start Antenna Installation" and continue with this
instruction manual. If this vehicle DOES NOT have a factory installed hood switch har-
ness (one is supplied in the kit), proceed with the complete "Hood Switch Harness Instal-
lation" procedure.
Hood Switch Harness Installation
1. Routing of the hood switch harness.
a. Attach the hood switch harness to the hood
switch.
b. Route harness along upper radiator
support and behind the bracket
mounted on the front of the driver's
side fender.
3 of 10
Factory Harness
Location
Tabla de contenido
