RS847 Self-propelled WC and shower chair with 4 wheels (Fig.3)
Fig.3
RS848 Foldable WC and shower chair with 4 wheels (Fig.4)
Fig.4
8. ASSEMBLING/DISASSEMBLING
8.1 Assembling RS844
To complete the assembly carry out the following operations:
• Instal the 4 wheels on the frame using screws and washers provided. The wheels without
brakes must be installed on the front side of the frame (fig.5);
• Insert the backrest inside the holes on the wheelchair frame and fix the backrest using the
two fixing knobs (Fig. 6);
• Insert the headrest in the support already installed on the push handle and tighten the support (Fig.6);
• Place the seat on the wheelchair frame and press down to fix its position, then add the cover (Fig. 7);
• Insert the footrests from the side and rotate them to the front until fastening into the holder (Fig. 8);
• Insert the bucket from the rear side of the shower and WC chair by sliding it into the slots.
Fig.5
1. Left frame – 1 pc
2. Right frame – 1 pc
3. Connecting pipe – 2 pcs
4. Backrest with armrests – 1 pc
5. Footrests – 2 pcs
6. Seat – 1 pc
7. Seat cover – 1 pc
8. Bucket – 1 pc
1. Foldable frame – 1 pc
2. Backrest with armrests – 1 pc
3. Footrests – 2 pcs
4. Seat – 1 pc
5. Seat cover – 1 pc
6. Bucket – 1 pc
Fig.6
Fig.7
5
Fig.8