Eaton Cooper Lighting PORTFOLIO CD61 Serie Instrucciones De Instalación

ADP140615
Installation Instructions – CD61*/CD62*/CD6S* Commercial
Recessed CFL Rough-In
Instructions d'installation – Nécessaire d'installation brute LFC
encastré commercial CD61*/CD62*/CD6S*
Instrucciones de instalación para la luminaria fluorescente compacta
empotrada de uso comercial en área oculta CD61*/CD62*/CD6S*
IMPORTANT: Read carefully before installing fixture. Retain
for future reference.
WARNING
Risk of Electrical Shock! Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Fire! Do not install insulation within 3 inches
(76 mm) of any part of the luminaire fixture or in a way
that may entrap heat.
N otee: This fixture should be supported by main runners or
other structure that is capable of supporting fixture
weight of 10 Ibs.
IMPORTANT SAFEGUARDS: When using electrical
equipment, basic safety precautions should always be
followed, including the following:
SAFETY INSTRUCTIONS
1. This unit is for recessed mounting only. Do not use in
hazardous locations nor near gas or electric heaters.
2. Do not use this equipment for other than the intended
use. (Figure 1.)
3. Install only in accordance with National Electrical Code
and local regulatory agencies' requirements.
INSTALLATION
To Install Rough-In Sections
1. Install fixture into ceiling cavity using 1/2˝ electrical
conduit. Use 3/4˝ channel, 1-1/2˝ channel, 1/8˝ x 1/2˝
bar stock, or T-bar fasteners as mounting rails (furnished
by others) by inserting the through hanger brackets at
both sides.
WARNING
Installation and servicing to be performed only
by qualified personnel. If not qualified, consult an
electrician.
Figure 1.
Aperture
CD61*/CD61*/CD6S*
TM
INS #
Ceiling Cutout
6-3/8" 7-1/4"