Working With The Device; Control Panel And Display - Masterpro BGMP-9127 Manual De Instrucciones

EN

WORKING WITH THE DEVICE

• Control Panel and Display

1
2
3
6
8
9
10
11
: POWER button, for activating the device; switching the heating function and the blend
7.
function.
: BLEND SPEED button, for activating the blend function and setting the speed level.
8.
Note: Disabled at a temperature setting of 120 °C.
: WEIGHING FUNCTION button, for activating the scale.
9.
10. : PULSE FUNCTION button, for activating the cross-blade attachment at maximum
speed.
NOTE: Disabled during the heating process at the temperature setting of 80 °C, 100 °C and 120 °C
for safety reasons.
11. : TEMPERATURE SET button, for setting the temperature (40 °C,60 °C ,100 °C,120 °C).
: TIMER SET button, for setting the preparation time (max. 60 minutes).
12.
13. : INCREASE(+) button, for increasing the speed level, temperature and preparation time
once the corresponding button has been pressed.
14. : DECREASE(-) button, for reducing the speed level, temperature and preparation time
once the corresponding button has been pressed.
1. Time / Weight / Error messages
4
display
2. Blend speed display
3. Unit of time display
5
4. Unit of weighing display
5. Temperature display
6. Function display:
7
PULSE : PULSE function display
13
: BLEND function display
14
: WEIGHING function display
: HEATING function display
12
10
• Basic Use of the Device
• CAUTION!! Risk of burns! The metal surface of the mixing bowl also becomes hot from the
heated contents. Only ever touch the mixing bowl by the handle or use kitchen gloves.
• CAUTION!! Risk of scalding from hot steam and hot condensation! Be aware that hot
steam will emerge from the mixing bowl lid during cooking. Particular care should be taken when
removing the lid and when using the steaming unit.
• Risk of damage to the device from overheating! Never place the motor unit on a soft surface.
The ventilation slots on the bottom of the device must not be covered. Otherwise, the device could
be damaged.
• Risk of damage to the device from falling! Note that when chopping up food the imbalance
which is created in the mixing bowl may cause the whole device to move in some circumstances.
The device should therefore be set up so that it cannot fall off the work surface.
• Do not overload the device! Only chop up hard foodstuffs (e. g. ice cubes) by pressing the
PULSE button with brief pauses.
• Overheating of the device! Do not allow the device to operate on speed level 2 for longer than
2 minutes without stopping. Then let the device cool down for a short while before it is used again.
• Risk of damage to the stirring attachment! When the stirring attachment is placed on the
device, only use speed level 1.
• For safety reasons, the device can only be switched on if the mixing bowl is fitted in the
motor unit correctly and the mixing bowl lid or steaming bowl are locked on.
• To save power, the display switches to standby mode when the device is not used for
approx. 4 minutes, "stdy" appears on the display. To switch the display back on again,
press the POWER button.
How to use this device? Please follow the below steps:
1. Place the motor unit on a dry, clean, flat and non-heatable work surface.
2. Make sure that the suction feet stick properly to the work surface.
3. Insert the mains plug into a properly installed plug socket that is easily accessible.
4. Ensure that the cross-blade attachment is correctly fixed in place in the mixing bowl. When
using additional accessories, e.g. for stirring or steaming, follow the instructions provided in "Using
Accessories Correctly".
5. Pour any ingredients you want into the mixing bowl. Do not exceed the MAX marking in the
mixing bowl!
6. Secure the mixing bowl lid on the mixing bowl and place the mixing bowl into the motor unit. If
you do not intend to boil milk, cream or pasta or steam food, close the opening in the lid with the
measuring cup that is supplied.
7. Switch on the motor unit by flipping the On / Off switch on the back of
the motor unit to the I position. A beep is heard and the device goes into
standby mode. "stdy" appears on the display.
8. Press the POWER button to activate the device.
9. Set the preparation time (max. 60 minutes): Press the TIMER SET button to activate the time
setting. Using this button to switch the unit of time between the minutes and seconds.
• Pressing at first time, the unit of time "Min" in the display will flash, then set the time in
minute by using the "+" and "–" buttons.
• Pressing at second time, the unit of time "Sec" in the display will flash, then set the
time in second by using the "+" and "–" buttons.
NOTE: This step can be skipped if the ingredients are only to be briefly chopped up or mixed
together and not heated, using the PULSE FUNCTION button or ingredients are to be weighed.
11
EN