Using Accessories Correctly - Masterpro BGMP-9127 Manual De Instrucciones

EN

USING ACCESSORIES CORRECTLY

• Cross-Blade Attachment
CAUTION!! Risk of damage to the cross-blade attachment! Do not drop the
cross-blade attachment and do not leave it lying in water or other liquids for longer than
two hours to avoid damage.
• The cross-blade attachment is used to chop up, stir and mix together the ingredients in the
mixing bowl.
• The device cannot be operated without the cross-blade attachment.
Inserting:
1. Before inserting the cross-blade attachment, ensure that the sealing ring is fitted
correctly on the shank of the attachment. Otherwise there is the risk that liquid will escape from
the mixing bowl into the motor unit and the device will be damaged.
If the sealing ring is not fitted correctly, slide it all the way onto the shank until it is firmly fixed behind
the two latches on the shank.
2. Hold the cross-blade attachment at the top end and place it in
the mixing bowl. Make sure that the cross-blade attachment rests
fully on the bottom of the mixing bowl. The two locking lugs on the
shank must be pushed through the recesses in the mixing bowl.
3. Hold the cross-blade attachment firmly, turn the mixing bowl
upside down and place the wing nut on the end of the shank. It
must be fully recessed. If necessary, twist the wing nut slightly to do
this.
4. Twist the wing nut clockwise as far as it will go.
5. Check that the cross-blade attachment fits securely.
Removing:
Follow the steps for inserting in reverse order:
1. Insert the blade cover, hold the cross-blade attachment at the top end with one hand.
2. Turn the mixing bowl upside down, loosen the wing nut anticlockwise and remove it.
3. Take the cross-blade attachment out of the mixing bowl.
04
• Blade Cover
The blade cover is intended to protect your hands when detaching the cross-blade attachment or
cleaning the inside of the mixing jug.
Inserting:
• The blade cover is placed onto the cross-blade attachment of the mixing bowl. To do this, hold
the blade cover on the end of the shank of the cross-blade attachment, then press two handles of
the blade cover onto the blade until a click sound heard.
Removing:
• To remove the blade cover,hold two handles and pull it up and off at the same time.
• Stirring Attachment (Butterfly whisk)
CAUTION!! Risk of damage to the cross-blade attachment!
Do not add any food which could damage or block the stirring attachment while the
device is operating.
• The stirring attachment is suitable for whipping cream or beating egg white and for stirring soups,
puddings, sauces, rice pudding etc.
Inserting:
• The stirring attachment is plugged onto the cross-blade attachment with the wings pointing
downwards. It must engage!
Removing:
• To remove it, twist it back and forth slightly and pull it up and off at the same time.
05
EN