Masterpro BGMP-9127 Manual De Instrucciones página 14

EN
• Mixing Bowl
The mixing bowl is where the items to be mixed or cooked are processed and heated. The
Markings in the mixing bowl show the minimum and maximum fill levels.
The minimum fill level of the mixing bowl is 0.5 litres.
The maximum fill level of the mixing bowl is 1.5 litres. Do not exceed this!
There is a danger of scalding from hot items that are being mixed splashing out.
Moreover, the mixing bowl could overflow during operation.
Inserting mixing bowl into the motor unit:
• Place the mixing bowl into the mixing bowl mount on the motor unit.
• Apply gentle pressure to push down the mixing bowl until you hear it engage in place.
Removing mixing bowl from the motor unit:
Press the release button, at the same time tilt the mixing bowl slightly towards you by pulling on the
handle, and pull the mixing bowl upwards out of the motor unit.
• Mixing Bowl Lid
The mixing bowl lid closes the mixing bowl. To ensure that the items being mixed or cooked do
not splash out, the device can only be operated if the lid has been attached and locked in place
properly.
Attaching:
CAUTION!! Risk of scalding from hot items that are being mixed splashing out!
Before inserting the mixing bowl lid, ensure that the sealing ring has been fitted correctly,
is clean and undamaged so that the lid is tight and neither liquids nor ingredients can
splash out between the mixing bowl and mixing bowl lid. If the sealing ring is damaged, replace it
immediately and always do so after no more than 2 years in each case.
• The sealing ring must be fitted in the groove at the edge of the lid. If this is not the case, insert
the sealing ring and make sure it's fitted correctly before use.
06
How to know if the sealing ring is fitted correctly?
Please check it as below after the sealing ring fitted:
Narrow side of sealing ring
Wide side of sealing ring
If the narrow side of the sealing is above
the wide side, then it's correct.
Inserting:
1. Insert the mixing bowl lid on top of the mixing bowl with the locking tab placed near to the slot in
the handle of the mixing bowl.
2. Gently twist the mixing bowl lid clockwise until the tab locks into the slot until a click sound heard.
Removing:
CAUTION!! Risk of injuries caused by food splashing out!
Only remove the mixing bowl lid once the cross-blade attachment has come to a
standstill.
CAUTION!! Risk of scalding from hot steam!
Be careful when opening the lid after cooking.
• To remove the mixing bowl lid, follow the steps for attaching it in reverse order:
1. Twist the mixing bowl lid anticlockwise until the tab is released.
2. Lift the mixing bowl lid off the mixing bowl.
Wide side of sealing ring
Narrow side of sealing ring
Contrarily, if the wide side of the sealing is
above the narrow side, then it's incorrect.
07
EN