Commissioning And Operation - Klarstein HOT SPOT CRYSTAL SPOTLESS SMART Manual Del Usario

EN

COMMISSIONING AND OPERATION

The heating plate can be used with 220 - 240 V ~ 50/60 Hz. Insert the power plug
of the appliance into the power outlet, turn on the power switch. You can now use the
appliance both via the control panel and with the remote control.
Turn on
First, set the power switch of the device, which is located on the side of the device, to the
„I" position. Press the button to set the function. The upper part of the control panel
displays the room temperature. The unit will now run at a low power level.
Mode
Press the Mode button to adjust the power.
Temperature adjustment
Press the buttons to set the desired temperature in the range 5 °C - 40 °C. The
temperature display remains illuminated for a longer period of time.
Timer
Press the timer button to set the timer. You can set the time until the automatic switch-off.
You can select a period between 1 - 24 hours. The remaining time until power off is
displayed on the screen.
Parental lock
If you press and hold the parental control button for 3 seconds, the symbol appears
on the screen. All buttons are now deactivated. You can deactivate the parental control
in the same way.
18