Commissioning And Operation; Operating Functions - Klarstein Thermaxx Heatstream Manual De Instrucciones

EN
18

COMMISSIONING AND OPERATION

Before first use
1. The power cord shall not be damaged or fractured.
2. Please verify the rated current of the power socket is in line with the requirements
of the appliance (see "Technical Data") and is equipped with a safety grounding
device before use. Otherwise, have an electrician replace the socket.

Operating functions

Work / Standby
Gear selection
Temperature settings
Timer
– Scheduled work
Timer
– Scheduling standby
• Plug in the power plug of the appliance into the
socket. The buzzer will "beep" for a long time.
• Press the standby button
heating working state, then press the standby button
again to enter the standby state.
• For work status, press mode button
of work modes such as high gear, medium gear, low
gear and energy saving gear.
• Under the working status, press and hold the Plus or
Minus button ( or ) to set the temperature, press
and hold the Plus or Minus button (
set the temperature.
• After setting the temperature, have non-operation for
5 seconds, exit the temperature setting screen.
• Tap the timer button
scheduled work setting screen.
• Press the Plus or Minus button (
scheduled time. Press the Plus or Minus button (
) for a long time to quickly set the scheduled time,
and the scheduled time will reach the working status
of the machine.
• Under the working status, press the timer button
enter the scheduling standby setting screen.
• Press the Plus or Minus button (
scheduling time. Press the Plus or Minus button (
) for a long time to quickly set the scheduling time,
and the scheduling time is in the standby state to the
machine.
to enter the high-grade
to select one
or ) to quickly
in standby mode to enter the
or ) to set the
or ) to set the
or
to
or