METRICA 60821 Manual De Usuario página 10

ATTENTION BEFORE USING THE INSTRUMENT, READ THE INSTRUCTIONS
1
2
3
4
1 I/O - Turns the instrument on/off (automatic
mode)
2 TILT - Protects against unwanted movement (auto-
matic mode)
3 SLOPE - Tilting of the non-self-levelling projected plane
(manual mode)
4 SPEED - Rotation speeds: 600/300/0 rpm
5 CAL - Instrument calibration (see instructions) (au-
tomatic mode)
6 SCAN - Concentration of beam tracing over a limited
length of time.
FOR USE / MAINTENANCE / CALIBRATION
7 - To direct the scan angle (automatic mode).
- To calibrate the instrument (automatic mode)
- To move the instrument step by step while the
beam is stationary (manual mode)
- To move the non-self-levelling plane (manual
mode)
8 MAN - Automatically level the instrument (automatic
mode)
- To enter the manual mode (manual mode)
8
7
6
5