Installation; Location; Door Handle Install Illumination(Optional) - EAS ELECTRIC EMC1880AW Manual De Instrucciones

IT IS HAZARDOUS FOR ANYONE OTHER
THAN AUTHORISED SERVICE PERSONNEL
TO CARRY OUT SERVICING OF REPAIRS
WHICH INVOLVE THE REMOVAL OF COVERS.
TO AVOID THE RISK OF AN ELECTRICAL
SHOCK DO NOT ATTEMPT REPAIRS
YOURSELF.

1. INSTALLATION

2.1 Location

When selecting a position for your unit you should make
sure the floor is flat and firm, and the room is well
ventilated. Avoid locating your unit near a heat source,
e.g. cooker, boiler or radiator. Also avoid direct sunlight as
it may increase the electrical consumption. Extreme cold
ambient temperatures may also cause the unit not to
perform properly. This unit is not designed for use in a
garage or outdoor installation. Do not drape the unit with
any covering. When installing the unit, ensure that 10 cm
of free space is left at both sides, 10 cm at the rear and
30 cm at the top of the unit. This will allow cold air to
circulate around the wine cooler and improve the
efficiency of the cooling process.

2.2Door Handle Install Illumination(optional)

1) Take out the screw caps from the
door handle holes.
2) Put the handles into the screw
holes and then hit them to fix.
25
V.2