6) Take off hinge assembly with a screw
driver. Assemble lower hinge assembly
to left side of the cabinet with a screw
driver.
2.4 Door space requirements
The unit's door must be able to
open fully as shown.
W×D≥990×1025mm
2.5 Levelling the unit
To do this adjust the two levelling
feet at the front of the unit. If the unit
is not level, the door and magnetic
seal alignments will not be covered
properly.
Make sure that the foot touches the ground
before use.
Look down from the top, clockwise and
counterclockwise loosening, tightening.
2.6 Cleaning before use
Wipe the inside of the unit with a weak solution of bicarbonate
soda. Then rinse with warm water using a 'Wrung-out' sponge
or cloth. Wash the shelves and salad bin in warm soapy water
and dry completely before replacing in the unit. Clean the
exterior of the unit with a damp cloth. If you require more
information refer to the Cleaning section.
10) Take on knuckle guard.
29
V.2