Controls & Features - MTD 19B70028OEM Manual Del Operador

Controls & Features
Deck Lift Handle
Blade controls and features are illustrated in Figure 3-1 and
described below.
Blade
The blade is used to push snow/dirt/gravel, etc. and can be
angled left or right and raised or lowered.
Deck Lift Handle
The deck lift handle is located on the RH console of the tractor
and is used to raise and lower the blade. The deck lift handle has
eight positions and each notch corresponds to a 1⁄2" change in
height position ranging from 1-1⁄2" at the lowest notch to 4" at
the highest notch.
Blade Release
Cable Lever
Blade
Figure 3-1
Blade Release Cable Lever
The blade release cable lever is used to change the angle of the
blade. Squeeze the trigger against the handle and push forward
on the blade adjustment handle to angle the blade to the left
or pull back on the blade pivot handle to angle it to the right.
Release the handle to secure into position.
Skid Shoe (Not shown)
The skid shoes are located on the bottom of the blade and can
be adjusted up or down depending on the conditions. The skid
shoes set the distance between the ground and the bottom of
the blade.
Shave Plate
The shave plate maintains contact with the pavement as the
blade is pushed forward.
4
Shave Plate
15