EN
24
TROUBLESHOOTING
Problem
Possible Cause
The "Water
Low water level or lack of
reservoir empty"
water.
indicator
turns
on.
The water screen at the
bottom of the water
reservoir is blocked.
Pump malfunction.
The "Ice basket
The Ice basket is full
full" indicator
and the infrared light is
lights up.
blocked by the ice.
The infrared light emitting
diode and the infrared
light receiving diode do
not work.
The "Ice basket full"
The ice shovel is blocked.
indicator
blinks.
The ice cube maker
The ice tray is not in the
stops working.
right position.
The ice basket is full
The "ice full" condition
but the "Ice basket
can not be detected as
full" indicator
the infrared light module is
does not illuminate.
interfered by the sunlight.
Solution
Stop making ice, refill water and
then press the Start/Stop button
.
Clean the appliance.
Contact customer service.
Remove the ice from the ice
basket.
Wipe up the foreign objects on
the infrared light emitting diode
and the infrared light receiving
diode and restart the ice cube
maker.
Contact customer service if the
infrared light emitting diode and
the infrared light receiving diode
still do not work after wiping up
the foreign objects on them and
restarting the ice cube maker.
Remove the ice that is blocking
the ice shovel.
Contact customer service if no ice
is blocking the ice shovel and the
indicator blinks.
Remove the ice in the ice tray and
press the Start/Stop button
restart the appliance.
Contact customer service if the
appliance still does not work
after restart.
Unplug the appliance and move
it to a place which is not exposed
to the sunlight, then plug the
appliance and activate it again.
to