BARREL REST ADJUSTMENT
You can change the height of the barrel rest by
loosening the 2 screws and repositioning the barrel
rest in the wall brackets. Hook the top tabs into the
tracks and retighten the screws.
INSTALLATION OF SCOPE STAND-OFF
To store a ri e with a scope you can install a
scope stand-o in the front position on the barrel
rests.
Screw the scope stand-o into the pilot hole of
the barrel rest.
SHELVING INSTALLATION
e shelving can be installed by locating the shelf
clips to the desired locations and se ing the shelf
in place.
BACK UP KEY
A back up key has been provided in case you have
forgo en or lost your security code. To open the
safe using the key follow the steps below:
1. Remove the cover
by pressing the tab and
turning the cover as
shown in the
illustration.
e lock
can hang by the
connecting cable while
unlocking the safe.
2. Insert the key in the key hole and turn clockwise
1/4 turn (until stopped) in order to unlock the safe.
Rotate the handle and open the door.
3. Keep the door open until you have entered a
new security code. Before entering your new code,
remove the key and screw the cover back in place.
4. Enter your new security code following the
instructions for entering your security code.
DOOR ORGANIZER ACCESSORIES
Your door organizer provides a variety of storage
options for your supplies. Removable pistol holsters
and storage bags can be located to suit your needs.
Note: Securely a ach the pistol holsters to the back
panel before you holster your pistol. Make sure the
door accessories do not interfere with items in the
safe or when closing the safe door.
IMPORTANT
Keep keys and combination number in a secure
place, away from children. Keep this record of your
key number and combination in a secure place
separate from your safe. To order a replacement key
set, follow the instructions on the a ached form.
STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
TAB
5
21
40356-1409