Wire Tie Qty; Part #346.58 - Bestop 77332 Manual Del Usario

Section 20
Re-attach Trim; Bundle Extra Wire
Step 1
Step 1
Re-attach the vehicle trim that you
removed in Section 15.
Re-install the seat belt that you removed in
Section 15. Torque the seat belt fastener to
35ft-lbs (48Nm).
NOTE:
There will be leftover CHMSL wire
after running wire to the rear of the vehicle
bed. On the inside of the cab, roll the wire
bundle up and use wire tie #346.58 to
secure it.
The wire bundle can be tucked behind the
trim panels that were removed in Step 2 of
Section 15 on Page 20.
P25 - 77332 Rev. C 1219
Hardware
Wire Tie

Part #346.58

Qty. 1
Upper Trim
Lower Trim
Installation Instructions - Supertop for Trucks
Page 25
© 2019 Bestop, Inc.