Tools And Materials; Before You Begin - Kohler K-3357 Guia De Instalacion

Tools and Materials

Supply
10" Adjustable
Shut-Off
Wrench
Valve
Wax Seal
Tubing Cutter
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

CAUTION: Risk of personal injury or product damage. Handle
with care. Vitreous china can break or chip if the product is
handled carelessly.
Observe all local plumbing and building codes.
Carefully inspect the new toilet for damage.
If the existing toilet does not have a supply shut-off valve below
the tank, install one before installing the new toilet.
Provide an adequate amount of clearance for the toilet's lift rod.
Clearance values are measured from the floor to the top of the
fully extended rod.
• K-3360, K-3612, K-14224 and K-14230 require 28" (71.1cm) of
clearance.
• K-3357 requires 32-5/8" (82.9cm) of clearance.
1021796-2-A
Tape
Sponge
Level
Measure
Safety
Putty
Glasses
Hacksaw
Knife
2
Pipe Wrench
5/16" Dia.
T-Bolts w/ Nuts
& Washers
Kohler Co.