Coffee Brewing - Automatic Fill (Plumbed) - Waring Commercial WCM50P Serie Manual Del Usuario

NOTE: Red POWER light will illuminate on front panel as well.
Slight dripping from the brew basket is normal as the tank heats
up.
6. When the coffee brewer is turned on, the water tank will
automatically fill.
7. Once heated to brewing temperature, the green READY light will
illuminate.
8. The brewer is ready to operate when the green READY light
illuminates.
COFFEE BREWING – AUTOMATIC FILL (PLUMBED)
1. Insert a filter into the funnel of the brew basket.
2. Place appropriate amount of ground coffee into the filter and
level the bed of grounds by gently shaking.
3. Slide the funnel into the rails on the coffee brewer.
4. Press the left rocker switch to activate the lower warmer. Press
the right rocker to activate the upper warmer.
5. Place an empty decanter beneath the brew basket prior to
brewing.
6. After the green READY light has illuminated, press the BREW
button to begin the brewing cycle.
7. Hot water will be delivered through the spray head. This
distributes the hot water evenly over the coffee bed within the
brew basket. The brewed coffee will drain from the brew basket
into the decanter below.
8. Once the decanter is filled, simply discard the grounds and filter.
9. TURN OFF WARMERS WHEN NOT IN USE.
HOT WATER FAUCET
– WCM50P/WCM60PT/WCM70PAP ONLY
1) The hot water faucet may be used to dispense a cup of hot
water at any time. Not intended for filling carafes, pitchers, etc.
Attempting to dispense more than 8-10 ounces will result in
cool water. NOTE: Faucet will not work with the pour-in feature;
brewer must be plumbed to a working water supply line.
11