Important; Assembly - Craftsman PRO Serie Manual Del Operador

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain
to service engine with gasoline and oil as instructed in the Operation section of the
Engine Manual before starting or running your machine.
NOTE: Reference to right and left hand side of the Lawn Mower is observed from the
operating position.
Unpacking
Opening Carton
1. Cut each corner of the carton vertically from top to bottom.
2. Remove all loose parts.
3. Remove loose packing material.
Removing Unit From Carton
1. Lift unit from the rear to detach it from underlying carton material and roll
unit out of carton.
2. Check carton thoroughly for any other loose parts.
Loose Parts In Carton
• Side Discharge Chute
• Engine Oil

Assembly

Unfolding The Handle
1. Tighten star knobs securing upper and lower handles together. Push down
on the handle adjustment lever with your foot. See Figure 1.
2. Pivot the handle into operating position. Be careful not to crimp cables.
See Figure 2.
3. The handle height can be adjusted to one of two positions. Push down on the
handle adjustment lever with your foot and place the handle into the most
comfortable operating position. See Figure 3.
Figure 1
ASSEMBLY
8
Figure 2
Figure 3