Hoover HN5D 84 B Manual De Instrucciones página 27

― Guesthouse environment
―Catering industry and similar applications of non -retail industry
PREPARATION BEFORE USE
Installation
1. Remove all packages
Remove all packing materials, including the foamed plastic seats and adhesive
tapes for securing accessories
2. Refrigerator cleaning
Clean the refrigerator before use
3. Standing still
Following the leveling and cleaning, let the Refrigerator stand still for at least 2 hours
before energized in order to insure it can operate normally.
4. Remove film
If there covers film on the surface of the refrigerator, please completely remove it or
the normal heat radiation effect of the refrigerator will be influenced, which results in
the increasing of power consumption.
5. Energize
When the refrigerator is firstly energized, it will automatically get into smart function,
with the Smart icon lit.
Notice: Please take off the protector on the pins of the plug. It takes 2 -3 hours before
the refrigerator can be normally used. Don't put foods into the refrigerator right
after the refrigerator is energized.
Notice: For a freestanding appliance: this refrigerating appliance is not intended to
be used as a built-in appliance
Carriage
Unplug the refrigerator.
Take all food in it out, clean the interior and open the door to dry it.
Use tapes to fix all moving parts (shelves, boxes and drawers) in the fridge and
freezer 4.Close doors of the refrigerator and use tape to get them fixed, to avoid the
opening when moved.
When you are moving it to a new home, the refrigerator shall not be laid down or
tilted for over 45° during transport. Otherwise, it may cause malfunctions.
To avoid the scrape of your floor, please cover the bottom part of the refrigerator.
Please do not make horizontal movements forcibly.
Please do not hold doors, the top lid, and other tubes of the refrigerator during the
transportation.
Under no circumstances shall the refrigerator be laid down！
Placement
The refrigerator should be placed on solid ground. When a greater height is required,
steady, hard and incombustible cushion block should be selected. If there is a slight
sway, the adjustable black foot in the front of the refrigerator could be adjusted. Turn
clockwise to raise up the Refrigerator.
Keep it away from heat source and sunlight to avoid malfunctions of the refrigerator.
There should be on obstacle in the vicinity of the refrigerator or inside the free built -in
space. To keep the refrigerator ventilated, there should be at least 10 cm against the
26