Power Supply; Network Power Supply - aquatechnik BBS 32 Instrucciones De Utilizacion

POWER SUPPLY

B TTERIES (18V) ND B TTERY RECH RGER (230V)
- The time needed for the recharging is 1½ - 2 hours.
- The continuous battery recharger red light indicates that batteries are being
charged.
· The red light is on to indicate the contact between the battery and battery
recharger.
· The green light is on to indicate the recharging cycle is over:
- The temperature increasing of the battery during recharging is normal. The battery
overheating can temporarily block the recharging process.
battery recharging start properly (in this case, the recharging time could be
longer).
- To preserve the endurance and the good performing of the battery, we suggest to
download completely - at the least the first few times- before the next recharging.
Perform partial battery recharging may cause a reduction of battery life
Warning: Batteries contain nickel-cadmium (NiCad). DO NOT DISPOSE
NORM LLY. Use the special recycling bins.
Warning: Perform partial battery recharging may cause a reduction of battery life.
B TTERY ENDUR NCE
The Coupling tool BBS 32 battery endurance changes according to the pipe
diameter. Inspections and tests performed in continuously on totally-charged
batteries have given the following values:
Pipe Diameter
Endurance: Number of
Couplings
NB: t very low temperatures (below 5°C), battery endurance may be exceedingly
lower than the one declared.
The battery endurance decreases if the coupling tool stays at rest for a long time.
The estimated battery life, if it's used correctly, is about 800 recharging.

NETWORK POWER SUPPLY

The Coupling tool BBS 32 can also be used with (230V) electrical network
connection by replacing the battery with an electrical transformer having size and
dimensions like the battery ones (item# 50447 optional).
14 - 16 18 - 20
230 200
BBS 32
(patented)
special sensor lets the
26 32
150 120
ENGLISH 21