Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly and Instructions for Use
1. Unpack the product. Wipe off dust with a damp cloth. (Fig 1)
Figure 1
Water
Light Cord
Adaptor
4
Cover
LED Light
Main Body
Tube
Lower Basin
Pump
Pump Power Cord
Figure 2
Attention:
In order to get
best results,
please operate
pump completely
submerged.
Keep the water
level above the
minimum water
level ALL THE
TIME.
2. Familiarize yourself with the pump. The switch located at the front of the pump controls the
pump speed. The speed is indicated by a plus (+) and minus (-) sign. To increase the speed,
move the switch slowly left in the direction of the plus sign. You will hear a click as the switch
moves to each speed level. At its highest speed level, the switch will cease to move any fur-
ther. To decrease the pump speed, move the switch right toward the minus sign. Similarly, at
its lowest speed, the switch will cease to move any further (Fig 2).
NOTE: It is recommended the pump be set at its highest speed during assembly and later
adjusted to a lower setting if desired. Be sure to unplug the pump before adjusting the speed
setting.
3. Insert the tube into the pump. (Fig. 3)
Figure 3
Tube
Pump
Minimum Water Level
Flow Control Valve
(+) faster water
output
(-) slower water
output
Figure 4
Water
5
Tabla de contenido
