Yakima BuckHorn 4 Manual De Instrucciones página 2

pull out the pin and wire-
lock from the hitch plate.
Install tongue.
push the tongue into the hitch plate, aligning the holes.
• Install one of the hex bolts and a flat washer.
• Add a second washer, attach a nut.
attaCH tHE Stop boLt
anD boLt SLEEvE.
• Install bolt, passing
through sleeve.
• Attach nut., TIGHTEN
with 9/16" wrenches.
Do noT oVeRTIghTen!
1033623B-2/15
FoR 1/4" hITcheS onlY. Remove 2" adapter.
• Remove bolt with wrench.
• Remove adapter.
InStaLL SafEtY pIn anD wIrE-LoCk.
Safety pin and wire-lock
must be in place when
bikes are loaded.
pin is only removed for
access to vehicle.
TIghTen with 9/16" wrenches.
1-1/2 to 2 threads
should be visible
above the nyloc
portion of the nut.
• Pivot tongue to fit into hitch plate.
• Align holes and insert pin.
nyLoC
ReplAce
WIRe-locK.