Gtec Saturn Manual Del Usuario página 86

USE
D
ESCRIPTION
Our range of CPS has been developed for use in emergency systems, in compliance with Standard EN 50171. The purpose of
this CPS is to ensure a perfect power supply voltage for the devices connected to it, whether mains power is present, or not.
Once it has been connected and powered, the CPS generates a sinusoidal alternating voltage with stable amplitude and
frequency, regardless of any sudden change or variation in the mains supply. While the CPS draws energy from the mains, the
batteries are kept under charge, controlled by the multiprocessor board. This board also monitors continuously the amplitude
and frequency of the mains voltage, the amplitude and frequency of the voltage generated by the inverter, the load applied, the
internal temperature and the state of battery efficiency.
The CPS block diagram is shown below with a description of its individual components.
CPS block diagram
IMPORTANT: Our CPSs are designed and built for long durability, even under the most stringent operating conditions.
However, it is important to remember that they are electrical power equipments and therefore, need regular checks. Moreover,
some components inevitably have a life cycle of their own, so, for this reason, they need to be checked regularly and, if
necessary, be replaced. This is referred in particular to the batteries, the fans and, in some cases, to the electrolytic
condensers.
Therefore, a preventive maintenance programme is strongly recommended. This preventive maintenance programme must be
entrusted to specialised personnel authorised by the manufacturer.
Our Technical Servicing department is at your disposal for customised preventive maintenance options.
86