Removing The Cps From The Pallet - Gtec Saturn Manual Del Usuario

R CPS
EMOVING THE
CAUTION! TO AVOID HARMING PEOPLE AND/OR DAMAGING THE EQUIPMENT, FOLLOW
CAREFULLY THE FOLLOWING INSTRUCTIONS.
SOME OF THESE INSTRUCTIONS NEED TO BE CARRIED OUT BY TWO PEOPLE.
▪
Cut the straps and remove the cardboard box by
sliding it upwards. Remove the packaging material.
▪
Remove the accessory box.
NOTE: the accessory box can be either inside the
packaging, or behind the USP door.
▪ The previously removed brackets can also be used as slides. Secure the slides to the pallet by using the type A screws,
making sure they are aligned with the wheels.
▪
Screw the brake rod completely, so to separate it from the pallet
▪
Make sure that the door is firmly closed.
▪
CAUTION! Push the CPS from the rear with great care. Given the weight of the equipment, this operation needs to
be carried out by two people.
NOTE : It is recommended to keep all parts of the packaging for further use
FROM THE PALLET
▪
Remove the 2 brackets securing the CPS to the pallet by
unscrewing the screws marked A and B in the figure.
72