Usb Charging Socket On The Rechargeable Battery Pack; Care And Maintenance; Cleaning & Maintenance - ANSMANN 1400-0080 Manual

Charge status and capacity indication during charging:
1 LED | 1 LED flashing:
2 LED | 1 LED illuminated + 1 LED flashing:
3 LED | 2 LEDs illuminated + 1 LED flashing: 41 – 60%
4 LED | 3 LEDs illuminated + 1 LED flashing: 61 – 80%
5 LED | 4 LEDs illuminated + 1 LED flashing: 81 - 99%
5 LED | 5 LEDs illuminated
Remaining capacity indication:
5 LEDs illuminated:
4 LEDs illuminated:
3 LEDs illuminated:
2 LEDs illuminated:
1 LED illuminated:
1 LED flashing:
USB charge socket (powerbank function) on the rechargeable battery pack:
Devices with a max. charge current of 2100mA can be charged with the USB charge port
(5V) on the rechargeable battery pack.
To do so, connect the device to be charged with a USB cable and then plug it into the
charge socket. When not being used, disconnect the cable again.
CLEANING/MAINTENANCE
Carry out cleaning tasks only when the mains plug is removed from the mains power!
Clean only with a slightly damp cloth, then rub it dry.
§
Never submerge the product in water or other liquids.
§
Do not allow fluids to enter the housing.
§
Do not use hard brushes or sharp objects for cleaning.
§
Improper usage of the lamp may result in it being damaged:
Do not throw or drop
§
Use only in original condition
§
Do not use while still in packaging
§
Turn off after use
§
12
Svenska | Italiano | Nederlands | Suomi | Norsk | Dansk
0 – 20%
21 – 40%
100% (fully charged)
81 – 100 %
61 – 80 %
41 – 60 %
21 – 40 %
10 – 20 %
<10 %
Deutsch | English | Français | Español | Português