Control Setting - HTW -PCS-026P21 Manual De Usuario

I. Operating instructions:
LED Control Panel Operation interface is as follows:
1: when the machine is powered on for the first time, the buzzer will play power-on music,
and then the machine will get into standby status.
2: Power Key: press the key to turn on and turn off the machine. In the case of power on,
press the key to turn off the machine; in the case of power off, press the key to turn on the
machine.
3: Mode Selection Key: In the case of power on, press the key to switch between cooling
→air supply ​​→dehumidification → heating (single cold with no such function) →
cooling → ​​... mode.
4: Up Key and Down Key: press the two keys to change the set temperature or timing sett
value, operate as follows:
While setting temperature, press up key or down key to select the required temperature (not
available in air supply or dehumidification mode).
While setting timing value, press up key or down key to select the required timing value.
Simultaneously press both keys to switch between Celsius (℃) and Fahrenheit (℉).
5: Wind Speed Selection Key:
In cooling and air supply mode, press the key to select high, medium or low wind
speed operation.
In heating mode, press the key to select high, medium and low wind speed operation.
But limited by anti-cold conditions, under certain conditions, it may not run according to the
set wind speed.
In dehumidification mode, pressing the key is invalid, and the fan will forcibly choose
low wind speed operation.
Page: 9/15
IV. Control Setting