Aqua Medic BLENNY Manual De Instrucciones página 11

1. Product description
Following parts are included:
- Aquarium 40 x 50 (incl. filter chamber) x 40 cm
- Turboflotor Blue 500
- Current pump NanoProp 5000
- Illumination 3 x aquasunspot 3 W
- Filter separating wall
- Filter basket for taking up activated carbon or phosphate absorbers
A timer is not included, but might be beneficial.
2. Set-Up of the aquarium
The aquarium can be placed directly on a sufficiently solid cabinet or desk. Beforehand, the cabinet
plate and the lower surface of the aquarium should be cleaned to prevent the bottom pane of glass
from bursting through grains of sand or any dust particles.
First of all, the aquarium has to be cleaned with clear water. Afterwards, the protective plastic film
has to be pulled off the black plastic rear wall (if applicable).
The lower edge of the rear wall has a lip made of self-adhesive foam rubber. Wipe any fingerprints
off the lower edge by using a dry cloth. Remove the protective plastic film from the self-adhesive
strip, apply and remove any excess rubber.
Now, push the rear wall into place.
3. Current pump NanoProp 5000
3.1. Included:
 NanoProp adjustable current pump, 12 V DC, with computer-optimized propeller.
 Electronic safety transformer, 100 – 240 V, 1.5 A max., adjustable from 6 – 12 V.
3.2. Features
The NanoProp 5000 magnetically coupled current pump is very quiet in operation. It has a fully
encapsulated synchronous motor. All materials are salt-water resistant.
The pump is operated with 12 V safety voltage, the transformer is included. The propeller of the
rotor is designed as a 3 blade model and computer-optimized. This design runs more smooth than
the 2 blade propellers.
The pump is adjustable. 4 different speeds can be adjusted by changing the voltage of the
transformer. The pump is designed for operation under water and pressure-free.
3.3. Technical data, table 1
Type:
Pump voltage:
Power uptake, watts:
Voltage transformer:
Max. l/h:
Min. l/h:
Cable length in m: Pump:
Transformer:
Class/protection rating:
Max. depth:
Max. media temperature:
NanoProp 5000
6 - 12 V
4 – 7 W
100 – 240 V, 50 – 60 Hz
5,000
2,000
2.8
1.50
1/ IP 68
1 m 
1m
35 °C
11