Idiomas disponibles
Idiomas disponibles
01 - 97
PREPARATION
* Remove the bumper (4 screws under the bumper,
and 4 screws under the rear doors) (Van only).
* Remove the shock absorber (Van only).
* Remove the plastic covers under the rails at points S.
* Cut the bumper (see Pict.1) (Van only).
ASSEMBLY
* Place the tapped shims G in the square hole under the rails
at points S (with the shortest part facing forward).
* Attach the angle brackets F to points S with the screw set S.
* Attach parts D and E to the box at points Y and X
with the screw set Y and X depending on the model.
* Attach the crosspiece A and parts D and E at
points V and W with the screw sets V and W.
* Attach the arms B and C to points W and U
with the screw sets W and U.
NOTE :
On the L4 (long) vehicle, drill holes in the rails at points U with a
diameter of 12.5 mm, then enlarge the interior of the inner side of the rails
to a diameter of 21 mm. Insert the crossbraces provided at the points U (see Pict. 2).
FINISHING
* Attach the ball hitch at points Z with the screw set Z.
* Tighten all screw sets at the points indicated below.
* Remount the bumper and attach it at points T
with the screw set T (Van only).
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
FASTENING KIT
2 HM12x50 screws
S
2 DEC12 washers
2 HM6x15 screws
T
2 6,5x20 plain washers
2 HM12x130 screws
2 DEC12 washers
U
2 12,5x36 plain washers
2 HM12 nuts
2 spacers dia. 15/21 Lg.91mm
2 HM10x30 screws
W
2 washers DEC10
4 HM10x40 Cl 10.9 screws
V
4 DEC10 washers
4 HM10 Cl 10 nuts
2 HM10x40 Cl 10.9 screws
2 DEC10 washers
X
2 HM10 Cl 10 nuts
2 10,5x27 plain washers
Type
Type
SI037
Approval No.
Towbar for
Boxer 09/06 - Ducato
e24*94/20*01*0067
09/06 - Jumper 09/06
Van and Platform
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM01\NDM0197-G - FOLIO NDMANG
306357600001
4 HM8x30 screws
4 DEC8 washers
Y
4 HM8 nuts
4 8x27 plain washers
Van
4 HM10x35 screws pitch 1,25
Y1
4 washers DEC10
4 plain washers 10x27
4 HM10x40 Cl 10.9 screws
4 DEC10 washers
Y2
4 HM10 Cl 10 nuts
8 10x27 plain washers
2 HM16x45 screws
Z
2 DEC16 washers
2 HM16 nuts
Max. Total
Max. Total
Towable Weight
Authori. Weight
3 500 kg
3 000 kg
Van
Van
Platform
Max. Verti-
Value
cal load
D
150 kg
15,84 kN
