NORTH STATES 5264 Instrucciones página 2

IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS
CAREFULLY AND KEEP FOR FUTURE REFERENCE
Important Information
There is a gap between your gate frame and handle. This is not a defect. The gap on your gate will close
once it is properly mounted. Please check the gate on a regular basis to ensure gate and parts are all in proper
working order. If the gate is used at the bottom of the stairs, please place towards the front of the lowest stair.
Ensure gate is attached between two clean, structurally sound surfaces. Ensure appropriate hardware is used
when mounting in solid materials such as wood or metal.
!
• For use with pets only.
• STOP using when a pet can climb over or dislodge the gate.
• Install only with locking/latching mechanism securely engaged.
• To prevent falls, never use at top of stairs.
• This product will not necessarily prevent all accidents.
• NEVER leave pet unattended.
• This gate is to be used in openings 29.8" to 38.1" (75.69 cm to 96.77 cm).
• Periodically check all fasteners to be sure they are tight and secure, stop
using gate if any parts are missing or become damaged.
Your safety gate contains the following:
x4
B
A
C D
To ensure safe operation, additional or replacement parts should be obtained only from North States or
its authorized distributors. Contact information appears on the cover of these instructions.
Any damage to property during installation of your safety gate is the sole responsibility of the end user.
Installation
Step 1
Measure the width of the opening and determine number of extensions needed
for the gate.
No extensions
29.8"-32.6"
x2
F
G
E
H
1 - 2.75" extension
x1
K
I
L
J
32.5"-35.4"
A. Tension Knobs
B. Spindles (attached to
gate frame)
C. Wall Cups
D. Tape Pads
E. Screws
F. Upper Extension Connector
G. Lower Extension Connector
H. Extension bar
I. Gate Stopper
J. Gate frame
K. Front Latch
L. Back Latch
2 - 2.75" extensions
35.3"-38.1"
Page 2