Installation - Glacier bay FS1A0026CP Guía De Instalación Y Cuidado

Installation

1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Clean off the mounting surface.
□
Remove the lock nut (G), metal washer (F),
rubber washer (E) and rubber washer (D) from
the faucet.
□
WITHOUT DECK PLATE: Insert the faucet (A)
through the mounting hole in the sink until
faucet (A) sets on top of the sink.
□
WITH DECK PLATE: Align the hole in the gasket (I)
and deck plate (H) with the mounting hole in the
sink. Insert the faucet (A) through the deck plate
(H) and mounting hole in the sink until faucet (A)
sets on top of deck plate (H).
H
I
1
NOTE: If the sink is uneven, use silicone under the
gasket (I).
A
A
2
H
4
2
Securing the faucet
□
Slide the rubber washer (D), rubber washer (E),
metal washer (F) and lock nut (G) over threaded
rod (C). Use the lock nut (G) to secure the rubber
washer (D), rubber washer (E) and metal washer
(F).
A
D
E
F
G
2