Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EXTENSION CORdS
Use proper extension cords. Make sure
your extension cord is in good condition and is a 3-wire
extension cord which has a 3-prong grounding type plug
and matching receptacle which will accept the machine's
plug. When using an extension cord, be sure to use one
heavy enough to carry the current of the machine. An
undersized cord will cause a drop in line voltage, resulting
in loss of power and overheating. Fig. d-1 shows the
correct gauge to use depending on the cord length. If in
doubt, use the next heavier gauge. The smaller the gauge
number, the heavier the cord.
FUNCTIONAL dESCRIPTION
FOREWORd
PC305TP is a 12-1/2 inch (317 mm) Portable Planer. This planer can handle workpieces up to 12-1/2 inches (317 mm) wide and 6
inches (152 mm) thick. The maximum depth of cut is 3/32 inch (2.4 mm). The PC305TP features a powerful 15 amp, 120 volt motor, a
two-knife cutterhead with double-edged reversible knives, knife-installation tool and wrench.
NOTE: The picture on the manual cover illustrates the current production model. All other illustrations contained in the manual are
representative only and may not depict the actual labeling or accessories included. These are intended to illustrate technique only.
CARTON CONTENTS
1. Planer
2. Cutterhead Guard
2
1
2
5
MINIMUM gAUgE EXTENSION CORd
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
Total Length
Rating
Volts
of Cord in Feet
0-6
120
up to 25
0-6
120
25-50
0-6
120
50-100
0-6
120
100-150
6-10
120
up to 25
6-10
120
25-50
6-10
120
50-100
6-10
120
100-150
10-12
120
up to 25
10-12
120
25-50
10-12
120
50-100
10-12
120
100-150
12-16
120
up to 25
12-16
120
25-50
12-16
120
GREATER THAN 50 FEET NOT RECOMMENDED
Fig. d-1
3
3. Knife Transfer Tool
4. 5 mm Wrench Assembly
5. M5 x 20 mm Hex Socket Head Screw
6. M5 x 10 mm Knob (2)
7. Elevating Handle
gauge of
Extension Cord
18 AWg
16 AWg
16 AWg
14 AWg
18 AWg
16 AWg
14 AWg
12 AWg
16 AWg
16 AWg
14 AWg
12 AWg
14 AWg
12 AWg
4
5
6
7
3
Tabla de contenido
