Operation - Home Decorators Collection 51556 Guía De Uso Y Cuidado

Operating Your Fan and Remote Control
1. Fan button. - Press and release the
fan on or off.
□
Fan on. The fan memory function will resume the speed
set on the fan prior to the power being turned off. The LED
bar will display the current settings for 5 seconds after the
button is released.
□
Fan off. The fan memory function will store the current
setting for the next time the fan is in use.
Note: If you are currently using Comfort Breeze
pressing the button will cancel Comfort Breeze
and resume normal fan operation.
Note: You must turn the fan on prior to using the timer
function.
2. Speed functions
+ button, increases the fan speed
□
Pressing and releasing the + button one time will increase the speed of the fan. Each setting increase will cause the LED bar to illuminate
slightly more, until the fan has reached the maximum speed setting, at that time the LED bar will be fully illuminated.
□
Pressing and holding the + button will increase the fan speed automatically through the speed settings and the increments will be denoted
on the LED bar. When the LED bar is fully illuminated, the fan has reached maximum speed setting.
□
Pressing the + button while in Comfort Breeze

operation.

– button, decreases fan speed
□
Pressing and releasing the - button one time will decrease the speed of the fan. Each setting decrease will cause the LED bar to dim slightly
more, until the fan has reached the minimum speed setting. At that time the LED bar will be approximately 25% illuminated.
□
Pressing and holding the - button will decrease the fan speed automatically through the speed settings and the increments will be denoted
on the LED bar. When the LED bar is 25% illuminated, the fan has reached the minimum speed setting.
□
Pressing the - button while in Comfort Breeze
operation.
3. Comfort Breeze
TM
There are three Comfort BreezeTM settings. Pressing the button will activate the Comfort BreezeTM mode and LED bar will
illuminate slowly from bottom to top to display the current setting.
□
Setting 1: Alternates through speeds 1 – 3, the LED bar should fill approximately 33%.
□
Setting 2: Alternates through speeds 1 – 6, the LED bar should fill approximately 66%.
□
Setting 3: Alternates through speeds 1 – 9, the LED bar should be fully illuminated.
Off Setting 1
button to turn the
Comfort Breeze
mode,
TM
mode
TM
mode will automatically cancel the Comfort Breeze
TM
mode will automatically cancel the Comfort Breeze
TM
Setting 2
14
LED bar
Scale indicating
fan speed
TM
Warm weather
(Forward)
Decreases the
light level
(Dimmer)
TM
TM
Setting 3
Fan on/off
Increases fan speed
Decreases fan speed
Timer
Cool weather
(Reverse)
Increases the
light level
(Dimmer)
Light on/off
mode and resume normal fan
mode and resume normal fan
Disable Comfort Breeze
TM